How to remove the instrument from the packing box that has been carried in, and remove the protective materials,
is explained.
To perform each work safely and correctly, be sure to follow the procedure specified herein.
Two or more persons should always work together to unpack the instrument.
When lifting the instrument, bend your knees fully or otherwise assume a natural posture.
When moving the instrument, do not let it tilt by 15° or more. The instrument may tip over or
cause accident.
1. Cut the two bands with a cutting knife, etc. and remove the cap.
2. Remove the sleeve fixing bolts (4 pcs) and take out the sleeves.
3. Remove the accessory box, protectors below the
accessory box, and monitor protectors.
4. Untie the plastic strings and remove the L-shaped
cushions at the four corners and the cushions
(left/right) above the top plate.
5. Remove the polyethylene bags.
6. Lift the instrument on each side at a time and
remove the two crossties supporting the instrument.
7. Insert crossties underneath the slope and unload
the instrument from the pallet.
To Next Page
Loading...
Need help?
General
