Sakura Histo-Tek VP1 User Manual

2. Edit Menu Screen
5-4
[2] Setting a solution name
1. Touch a desired solution name in the "Solution
Name" field [1] in the solution configuration display
field.
2. The Select Solution Name window appears.
3. Select from the "Solution Name List" [2].
If "Solution Group" [3] is selected, touching Enter [5]
changes the solution names in all solutions of a
solution group.
If "Single Solution" [4] is selected, touching Enter [5]
changes a solution name in the single station that
was selected by operator only.
Touching Save saves the settings, after which the
Utility screen will be displayed.
Note
This function is applicable to all stations from
Sta. 1 to Sta. C2.
[3] Setting a management method of the solution
Solution usage is managed separately for Sta. 1 to Sta.
14, and for C1 and C2. When the settings are complete,
touch Save. This will save the settings, after which the
Utility screen will be displayed.
 Setting the management method for Sta. 1 to Sta.
14
Touch the Management Method (1-14) display area,
and select a desired method from the pop-up menu. If
the management method is changed, the values in
the Limit column are reset to the default value for the
management method newly selected.
Selectable options: Days, Runs, Cassettes, NONE
 Setting the management method for Sta. C1, Sta. C2:
Touch the Management Method (C1 - C2) display
area, and select a desired method from the pop-up
menu. If the management method is changed, the
values in the Limit column are reset to the default
value for the management method newly selected.
Selectable options: Days, Runs, NONE
[1]
[2]
[3]
[4]
[5]
[1]

Sakura Histo-Tek VP1 Specifications

General

Brand	Sakura
Model	Histo-Tek VP1
Category	Laboratory Equipment
Language	English