This instrument allows for solution exchange of processing solution at Sta.1 to Sta. 10 based on automatic transfer.
Select the stations subject to automatic transfer, for each solution group set in the solution configuration
information. Refer to p. 4-1 for details.
Automatic transfer cannot be performed during tissue processing.
6) Solution Station and Solution Group
This paragraph provides explanation about the station number and intended use of each station.
Sta. 1 to Sta. 14 are used for the tissue processing. Among the retort cleaning stations, Sta. C1 is used exclusively
for cleaning xylene and Sta. C2 is used exclusively for cleaning alcohol.
This instrument manages the solutions in Sta. 1 to Sta. 14 based on solution groups. The paraffin stations (Sta. 11
to Sta. 14) are automatically registered as "Paraffin Group." Up to six solution groups can be set. The user can set
desired solution groups for Sta. 1 to Sta. 10 according to the actual state of tissue processing. A solution group is
defined as a group of stations of consecutive station numbers.
Solution for tissue processing
Solution for tissue processing
Solution for tissue processing
Solution for tissue processing
Solution for tissue processing
Solution for tissue processing
Solution for tissue processing
Solution for tissue processing
Solution for tissue processing
Solution for tissue processing
Paraffin for tissue processing
Paraffin for tissue processing
Paraffin for tissue processing
Paraffin for tissue processing