Sakura Histo-Tek VP1 User Manual

1. Installation Method
1-8
6) Switching the Power-supply Voltage Setting
Caution!
This instrument supports multiple voltages, but the setting on the instrument side must be switched
according to the power-supply voltage.
If the instrument is used without switching the voltage setting, not only the instrument will break down, but
the user may also be exposed to danger; accordingly, contact local representative or the Sakura Finetek
Technical Support when the instrument is installed and schedule an appointment to switch the voltage
setting according to the voltage on the facility side.
The factory setting is 230 V (220 to 240 V).
7) Checking the Accessories
Confirm that all of the accessories are present (refer to the table below) and the instrument and accessories are
free from damage.
If the instrument is damaged or any of the accessories is short or damaged, contact your nearest Sakura Finetek
dealer.
Name of part
Q'ty
Remarks
Basket with handle (150 cassette size)
2
Basket set (with dedicated lid)
Basket transport tray
1
Activated carbon filter
1 box
Containing 2 units
Divider for fume control unit
1
Spill tray (for paraffin oven)
1
* Wide
Spill tray (for Reagent bottle rack)
1
* Narrow
Paraffin scraper, Large
1
Reagent bottle label set
12
10 for processing/2 for cleaning
Color coding labels
2
1 sheet consists of 6 colors x 4 cuts
Power cord (for 100 VAC/115 VAC)
1
Power cord (for 220 ~ 240 VAC)
1
Paraffin container
4
Housed in the instrument
Reagent bottle set (with plug/bottle cap)
12
Housed in the instrument
Screen protection sheet
1
Already attached to the screen
Operating Manual
1

Sakura Histo-Tek VP1 Specifications

General

Brand	Sakura
Model	Histo-Tek VP1
Category	Laboratory Equipment
Language	English