On the Utility tab screen, touch the System Setup icon to
open the System Setup screen.
On the System Setup screen, "Date Format," Time
Format, "Experiment Number," "Back Light Off" and
"Activated carbon filter Management" can be set.
You can also move to the "Date & Time," "Password,"
"Sound" or "Institution Name" window.
[1] Date Format button
Use this button to set the date display format. Touch the date format display area, and
when the pop-up menu is displayed, select a desired option.
Options: "YY/MM/DD," MM/DD/YY" and "DD/MM/YY"
[2] Time Format button
Use this button to set the time display format. Touch the time format display area, and
when the pop-up menu is displayed, select a desired option.
Options: "12 hours" and "24 hours"
[3] Experiment Number button
Set whether or not to enter experiment numbers. Touch the experiment number entry
display area, and when the pop-up menu is displayed, select a desired option.
Options: "ON" and "OFF"
Selecting "ON" lets you enter an experiment number at the start of tissue processing.
Experiment numbers cannot be entered if "OFF" is selected.
[4] Back Light Off button
Use this button to set the time until the backlight turns off. Touch the backlight display
area, and when the pop-up menu is displayed, select a desired option. Options: "Always
ON," "15 minutes," "30 minutes," "45 minutes," "1 hour," "2 hours," "3 hours" and "4
hours"
The backlight will turn off when the time set here elapses after the last screen operation.
[5] Activated carbon filter Management button
Use this button to manage the filter.
Touch the activated carbon filter management display area, and when the pop-up menu
is displayed, select a desired option.
Options: "2 weeks," "3 weeks," "4 weeks," "5 weeks," "6 weeks," "7 weeks," "8 weeks"
and "No Use"
[6] Date & Time button
Use this button to move to the screen for setting date/time.
[7] Password button
Use this button to move to the screen for setting passwords and user names.
[8] Sounds button
Use this button to move to the screen for setting alarm sounds.
[9] Institution Name button
Use this button to move to the screen for setting institution names.