LED R&D Lab(VD)
114
IG
(interface Gender)
ONE CONNECT
SNOW-AAE
(SBB-SNOWAAE)
• SNOWAAE S-BOX Connection
① Input video signal to S-BOX. (Input port : HDMI, DP)
② Check the input signal through SOURCE STATUS.(RED : HDMI1 , GREEN : HDMI2, Blue : DISPLAY PORT)
③ AAE Box supports 8K(7680 x 4320 @60Hz) input resolutions.
※ 8K Input Setting : Menu – Picture – Advanced Settings – Input signal plus (Select input signal)
☞ Input Signal Plus: Default: OFF, When the item is changed, the S-BOX is rebooted.
☞ When operating with Multi HDMI, it is converted to 4K and played.
☞ When Screen Mirroring is activated, it is converted to the resolution of the screen transmission device and played.
④ Connect the optical Rx of the AAE Box and the optical Rx of the IG side with an optical cable.
(※ Connect optical Rx to IG's ONE CONNECT)
⑤ Displays the screen based on the cabinet at the top left. To view the screen, connect it to the HDBT OUT1 port of S-BOX.
⑥ S-BOX can only support screens composed of a single pitch.
【 INFORMATION LCD 】
8. S-Box Installation and Connection
* Less than 4K@60Hz
To Next Page
Loading...
