LED R&D Lab(VD)
89
◇ After confirming the IWA/IFA model specification, BEZEL additional ASSY operation
1. Check the IWA/IFA model specifications.
2. Add MAGNET SHEET specification for IWA model only.
＊ IFA models are ready-to-use without additional attachments
□ Mounting position guide
1. Attached opposite the position of
the lower MAGNET (existing ASSY
magnet)
2. Bezel attached to the wall
MAGNET SHEET
upper
lower
MAGNET is floating
direction
Existing ASSY Magnet
Attachment Location
Attached over the bottom
magnet
MAGNET SHEET upper/lower
division
Remove the double-sided tape on the bottom and attach
Attached with BEZEL
Attach in the direction
7. Frame Bezel installation
To Next Page
Loading...
