LED R&D Lab(VD)
16
◆ Precautions for Installation (LED Damage)
Cautions Image
[Beware of Outside Impact, Fall]
① Beware not to cause any impact on the LED screen or drop the product on
the floor after the protection gets taken off for installation.
② Beware not to put the LED side headed downwards to the floor after the
protection gets taken off for installation.
③ Beware not to have the corner area of LED module be damaged due to the
contact with the outside.
④ Beware not to put more than 12 layers.
① ②
③ ④
[Beware of LED Damage due to Static Electricity]
▶ Beware not to touch LED screen with bare hands without putting gloves on.
[Beware of LED & Film Damage due to Metallic Substances]
▶ Beware not to have metallic substances pulled in to the surface
due to the magnetic force on the front side of the LED.
▶ If any metallic substances get drawn in on the surface, please disassemble
the module and then remove the pollutants by using a magnet.
MODULE
Front
Metal
matters
1. Product Information and Installation Precautions
To Next Page
Loading...
