LED R&D Lab(VD)
215
Appendix 5 – AAE S-Box How to set Multiview function
◆About Multiview function
• When the selection button is pressed on the remote control while the Multi View is active, you can set to change the
source and screen size, delete the screen and exit to full screen.
• When the 4 HDMI (Borderless) layout is selected, the sound on the HDMI 1 screen is heard, but the control bar does not
appear. When any of 2 HDMI, 3 HDMI, and 4 HDMI is selected, the screen appears depending on the number of the
connected devices.
• Note the following when any 8K content is input through HDMI 2.1. :
• When the Screen Mirroring is activated through HDMI, the message indicating the unavailable content appears. (4K
content is supported up to 60 Hz through HDMI connection.)
• When using Multi-HDMI, content is played back after converting to 4K.
• Interlaced mode input is not recommended in Multi View. Use the progressive mode input.
• Multi View does not recommend frequencies above 60 Hz. The recommended input signal is 60 Hz or less
• Supported Layout list. (* marked layouts : It requires additional setting.)
4 screen 3screen 2screen 1screen + mirroring
*
*
*
*
*
To Next Page
Loading...
