LED R&D Lab(VD)
196
10-2. SW update – S-Box
2) Sub Micom Upgrade
(You can upgrade Sub Micom in Factory Mode. It takes about 1-2 minutes.)
1. Save the “OSPMICOM_LXTV_SS.bin” file to the USB root.
2. Connect USB.
3. Enter the factory mode.
4. Select the “SVC → UPGRADE” menu.
5. Move the cursor to the “SUBMICOM UPGRADE” menu.
6. Click the Enter button.
7. Press the ‘▶’ button on the remote control to start the upgrade.
10. Settings / How to Use
② Update via USB
To Next Page
Loading...
