Samsung LH0 IWA W - 10. Settings; How to Use

LED R&D Lab(VD)
175
AAE: OC (Fiber
Cable)
JMU: HDBT (LAN
Cable)
Etherne
t
Cabinet
1
Cabinet
2
Cabinet
3
Cabinet
4
Control PC
S-BOX
Interface Gender
Video: VBY1
Control: Ethernet, I2C,
UART
Video: VBY1
Control: Ethernet, I2C,
UART
1. Connect the PC to the S-Box via Ethernet.
2. Use a LAN cable to connect the S-Box to the Interface Gender.
3. Use an OCM cable to connect the Interface Gender to the first LED cabinet.
4. Use OCM cables to connect the LED cabinets to one another in a daisy-chain configuration.
10. Settings / How to Use
10-1. Control Program for PC