LED R&D Lab(VD)
25
• Notes on Recessed installation
150mm left and right space required for serviceability. (Fig.1)
Due to the characteristics of the product, the fixing screw is placed inside, so it is necessary to secure a field of view of about 150mm. (Fig.2)
* Same as the heat dissipation specification, a space of at least 30mm above and below is required.
WALL
150mm 150mm
150mm
Need to secure a field of view to check the position of the side screw
Working with a fist screwdriver
Fig.1 Secure 150mm of left and right space for serviceability Fig.2 work guide
1. Product Information and Installation Precautions
At least 30mm