LED R&D Lab(VD)
19
◆ A guide for radiant heat
Installation Condition
- Standard for using SAMSUNG FRAME KIT
- In principle, solar window direct radiation condition installation is avoided.
- Room temperature is recommended to be less than 25 ℃.
- Effect of Cold / Hot Wind on Air Conditioning System
∙ If the cold or hot air is the same air conditioning system,
be careful not to affect the product ,
- Air temperature measurement position
∙ Measure 300mm separated from the center of the product
Air vent Aperture ratio
- Use the mesh type air vent.
-
If Aperture ratio is not 100%, Separation Distance =
Minimum Separation Distance
Aperture ratio(%) / 100
- Aperture ratio (%) =
. ℎ
A
B
d
c
wall
Air Temperature
measurement
position
300mm
1. Product Information and Installation Precautions
※ Written under ‘Full white, (back light 7)’ standard
Written under ‘Video, (back light 10)’ standard
To Next Page
Loading...
