LED R&D Lab(VD)
197
10-2. SW update – S-Box
3) SE19HM02 (Novatek), KU060/K325T (FPGA) Software Upgrade
1. Save the necessary files to each folder on the USB root.
• SE19HM02: under SBNVT19HWWS folder
• KU060 #1: Under the SBKU060AWWF1 folder
• KU060 #2: Under the SBKU060AWWF2 folder
• K325T: SBK325TAWWF folder
• IG K325T: SBL325TIGWWF folder
2. Connect USB.
3. Enter the factory mode.
4. “In Factory, go to SVC> Upgrade FW Update> FW Update.
5. Move the cursor to the item you want to update.
6. Click the Enter button on the remote control to start the upgrade.
10. Settings / How to Use
② Update via USB
※ Screen blinking may occur during Firmware update
To Next Page
Loading...
