LED R&D Lab(VD)
44
CASE 1. Module warpage(Concave shape) solution
◆ Refer to when the screen is directly exposed to the light source or when module shaping concave)
※ Reworking instruction
2) Rotate screws like below in the ASSY Module to counterclockwise.
* Proceed by referring to the production date of the label attached to BOX.
As of November 2021,
The production before November is applied to Case 1-1
The production after November is applied to Case 1-2
2021.11 Production→ Apply Case 1-2
To Next Page
Loading...
