LED R&D Lab(VD)
180
10. Settings / How to Use
1. Connection layout: Use the S-Box output source section to
adjust the LED cabinet layout by rearranging cabinets.
2. Feature View : Align, Layout preset, Export and Import for
Cabinet Layout
3. Device Information/Setting View:
Shows LED cabinet information based on the following
categories.
(i) Resolution: Resolution of the input source
(ii) ViewPort: Width/height, video wall matrix, x/y coordinate
settings
(iii) LED Signage Cabinet: X, Y positions of LED cabinets
4. Show ID: Select to cause each of all connected LED cabinets to
display their ID.
5. Save/apply or cancel settings
3
2
1
5
4
10-1. Control Program for PC
To Next Page
Loading...
