Samsung LH0 IWA W - 슬라이드 번호 124

LED R&D Lab(VD)
123
④ Instruction for handling Optical Cable
 Consider the pulling force so that the minimum force is applied to the optical fiber when installing
the cable. (Refer to each cable specification.)
 Optical loss occurs, If the optical cable is bent above the allowed bending radius. Install cable below
allowed bending radius. (Refer to below picture.)
 Be careful not to bend or twist like a right angle (Refer to picture)
 Do not step on the optical cable or press it in weight. The cable can be broken by heavy things.
 Do not use cable tie, etc. Loss or disconnection can be occur due to bending and compression.
12
8. S-Box Installation and Connection