LED R&D Lab(VD)
29
▶ Basic connection Type : Upper / Lower docking for vertical, OCM Cable for Horizontal
1) Cable-less Connection ( IWA Pillar Structure )
- Configure 4K / 8K Screens using upper / lower docking only, without OCM Cable.
2) OCM Cable Connection ( IWA / IFA )
- For IFA and IWA particular resolutions
- From edge of upper or lower cabinet (Highest or lowest cabinet inside the output port
resolution) to horizontal direction (next installation column)
3) Cable Only Connection ( IWA / IFA, for the case of single level installation)
- For the case of single level installation that goes only with horizontal direction, without vertical docking connection.
▶ Redundancy Specification ( varied by resolutions )
※ Redundancy : Introduced to protect screens from blackout caused by malfunction from its components.
- IG Redundancy ( 4K ) : Secure backward signal path using IG Backward port
- S-Box Redundancy ( IWA 8K ) : Duplication builds of signal using 2EA S-Box and IG BWD port
- B2C M-Box model not supported.
□ Special Features of IWA / IFA Screen Configuration (Compared to former models)
※ IFA + JMU S-Box Redundancy
※ IG and S-Box for redundancy need to be purchased separately
1. Product Information and Installation Precautions
※ Video signal and AC Power ※ Video signal only
※ ex) The lowest 4X1 area from IWA P0.84 5X5 Screen
To Next Page
Loading...
