LED R&D Lab(VD)
83
⑩ After installing the CABINET, fix the X-axis position by fastening the screw on the side and
the Z-axis position using a magnet.
※ Connect the outermost 2 points of the CABINET (Fig. 1)
※ A magnet is attached to fix the Z-axis of the surface where the CABINETs meet (Fig. 1).
1 2 3 4
7 8 9 10
13 14 15 16
19 20 21 22
25 26 27 28
5
11
17
23
29
31 32 33 34 35
6
12
18
36
24
30
Fig.1 Fixing the X-axis position and attaching magnets by fastening the screw on the side
20x20 magnet
(Frame kit included)
◇ CABINET installation (IWA P1.26)
[ UHD SCREEN (36Cabinet) ]
5. Cabinet + Frame installation
-
+
MAGNET
CASE 1 ) When there is no Z step: No separate
attachment specifications
CASE 2 ) In case of step difference: Attach 2 magnets
so that the sheet faces toward the “-” side
(Sheet can be additionally attached depending on the
level of the step)
To Next Page
Loading...
