LED R&D Lab(VD)
194
10-2. SW update – S-Box
• USB Download
Firmware upgrade downloaded from the "www.samsung.com" website
1. Connect the USB drive where the files are stored to the set.
(Be careful not to disconnect the power or USB drive during the upgrade.)
2. When the firmware upgrade is complete, the set will automatically turn off and
then turn on again.
3. After completing the upgrade, check the firmware version.
(The new version has a higher number than the old version.)
※ Note) Since it is recognized as a file name, it is safe to have other model upgrade files together.
※ Note) After upgrading the software, the setting values specified by the existing user are returned to the default
values. We recommend that you write down the current settings to facilitate resetting after upgrade.
1) OSCAR-P Main Micom Software upgrade
② Update via USB
10. Settings / How to Use
To Next Page
Loading...
