Samsung LH0 IWA W

LED R&D Lab(VD)
133
① Follow the steps below to enter the Factory Menu.
- Connect the external IR cable to the S-box.
- Remote Control Power off  Wait 10 sec  Press Mute - 1 - 8 - 2  Press Power on button
② Factory Menu, Option  MRT option  SIMPLE WALL MODE SUPPORT  ON
[Cautions!] Do not run Simple Wall Mode in an environment with multiple S-boxes.
Wallpaper may not run at the same time for each S-Box.
• Simple wall mode Operation
 This is a function that allows users to simply display a wallpaper and use it when the user does not
want to display a black screen while not using the product.
 If the screen resolution is within the output resolution of S-Box, you can turn on Simple wall mode
from the Factory menu.
※ Only for JMU/JAU/RAF models
8. S-Box Installation and Connection