LED R&D Lab(VD)
195
10-2. SW update – S-Box
1) OSCAR-P Main Micom software upgrade
1. Save the “SB-OSCPSBAWWC” folder to the USB root.
2. Connect USB.
3. Click the “MENU” key on the remote control.
4. Select the “Customer Support” menu.
5. Select the “Software Update” menu.
6. Select the “Update Now” menu to start the upgrade.
7. Wait for the upgrade to complete.
8. Check the SW version.
10. Settings / How to Use
② Update via USB
To Next Page
Loading...
