Sanyo PLC-HF15000L Service Manual

-180-
Troubleshooting
Indicators and projector condition
Check the indicators for the projector condition.
The projector is operating normally.
• • • on
• • • off
• • • blinking at the normal rate
(approx. 1 second ON,
1 second OFF)
• • • dim
• • • blinking slow
(approx. 2 seconds ON, 2
seconds OFF)
• • • blinking fast (approx. 0.5
seconds ON, 0.5 sec-
onds OFF)
Indicators
Projector condition
POWER
green
LAMP
red
WARNING
TEMP.
red
WARNING
FILTER
orange
SHUTTER
blue
LAMP
REP.
orange
The projector is off. (The main On/Off switch is OFF
position or the AC power cord is unplugged.)
✽ ✽ ✽
The projector is in stand-by mode. Press the ON/
STAND-BY button to turn on the projector.
✽ ✽
The projector is operating normally.
(The Shutter is open)
✽ ✽
The projector is operating normally.
(The Shutter is closed)
✽ ✽ ✽
The projector is preparing for stand-by or the projec-
tion lamp is being cooled down. The projector can-
not be turned on until cooling is completed and the
POWER indicator lights green.
✽ ✽
The projection lamp is being cooled down in the
Power management mode.
✽ ✽
The projector is in the Power management mode.
✽ ✽
The projection lamp is being cooled down in the
Shutter management mode.
✽ ✽
The projector is in the Shutter management mode.
Press the ON/STAND-BY button to turn on the pro-
jector.
✽ ✽ ✽
The projector is cleaning the filter.
✽
• • • Differs according to conditions.
• • • blinking slow
(approx. 1 seconds ON, 5
seconds OFF)

Sanyo PLC-HF15000L Specifications

General

Brand	Sanyo
Model	PLC-HF15000L
Category	Projector
Language	English