-44-
Disassembly requires a 2.0mm or 2.5mm hex wrench and a screwdriver.
Optical Parts Disassembly
1 Shutter assy removal
Remove 2 screws-A (M4x6) to remove the shutter assy upward.
A
A
Shutter assy
1 Shutter assy removal
2 Panel/Prism assy removal 2-1
Polarized glasses-out/pre-polarized glasses removal
2-2 LCD panels removal
3 Polarized glass/Optical filter assy removal
3-1 Polarized glass-in/Optical filter mounting
4 Optical filter (LC-CS) removal
5 Integrator-in assy removal
6 PBS/Integrator-out assy removal
7 Condenser lens assy removal
8 Relay lens assy removal
9 Optical unit top removal 9-1 Optical parts locations in the optical unit
10 Optical lamp unit top removal 10-1 Optical parts locations in the optical lamp unit
10-2 Mirror assy removal
10-3 Optical filters assy removal
Order of disassembly
Guides
Guides
Note on mounting the shutter assy
Mount the shutter assy on the panel/prisml assy
carefully to set the holes of the shutter assy onto
the guides of the panel/prism assy.
Shutter assy
Panel/prism assy
To Next Page
Loading...
Need help?
General
