Sanyo PLC-HF15000L Service Manual

-66-
Optical Adjustment
1 Select the internal test pattern signal "All white" from the projector's menu "Menu -> Setting -> Test pattern".
2 Loosen 2 screws A on the integrator(OUT)/PBS unit.
3 Insert a slot screwdriver into the slots B and turn it as the brightness on the screen is to be the maximum.
4 Tighten screws A to fix the integrator(OUT) unit.
2. PBS adjustment
A
B

Sanyo PLC-HF15000L Specifications

General

Brand	Sanyo
Model	PLC-HF15000L
Category	Projector
Language	English