98 BioPAT
®
Trace | Multi Trace Operating Instructions
Operation
By pressing the “Apply” button, the settings selected are transferred to the
right list box and arranged chronologically. The entry can be marked by click-
ing on a line and removed from the list again by pressing “Delete”. Double
entries will be ignored, or at the same time entries only the command above is
processed.
Pressing the “OK” button, all records are saved and activated. Press
“Canceled” to discard the changes. After a scheduled event was carried out,
the entry is removed from the list and does not appear at a later opening of
the schedule again. Thus, only the pending events are displayed.
8.3.8.2 Workflow
The sequence of actions is created by registration of the time interval, the
desired action (measurement or calibration), the number of individual mea-
surements and the corresponding test port. The time interval between the
individual actions is entered in the field “after ... Minute(s)”. If “1” is entered,
the next action is performed after a minimum time interval (rinsing of the
probe). By choosing larger intervals, the measurement frequency is reduced
accordingly.
To Next Page
Loading...
