Satel Integra 64 - Page 115

SATEL INTEGRA 113
•
Section describing test transmissions has been modified (p. 100).
2015-10
1.14
• Structure of the manual has been modified.
• List of functions available in the service mode menu has been supplemented
(p. 7-25).
• Information on the required version of DLOADX program has been added
(p. 28).
• Section has been added to describe parameters related to communication
between the control panel and the DLOADX program (p. 30).
• Section describing how to start remote programming via modem has been
modified (p. 35).
• Section describing how to start remote programming via Ethernet has been
modified (p. 39).
• Information on communication via the SATEL server has been added (p. 40
and p. 41).
• Section describing how to start remote programming via GPRS has been
modified (p. 42).
• Section on files with data saved by the DLOADX program has been added
(p. 46).
• Description of Z
ONE SENSITIVITY parameter has been modified (p. 54).
• Description of 95. E
NTRY INTERIOR zone type has been added (p. 57).
• Description of 96. F
IRE MONITORING zone type has been added (p. 57).
• Description of P
ULSATING option has been corrected (p. 67).
• Section describing system options has been modified (p. 71).
• Section describing parameters and options of keypads has been modified
(p. 80).
• Section describing timers has been modified (p. 94).
• Description of
HEX option has been added (p. 100).
•
Description of SIA-IP
ACCT
parameter has been added (p. 100).
2016-04
1.15
• Information on the required version of DLOADX program has been modified
(p. 28).
• Notes on AMD-103 detector have been added in section “Parameters and
options of ABAX system” (p. 86).
• Notes on AMD-103 detector and information on AOD-200 detector have been
added in section “Parameters and options of wireless devices” (p. 87).
•
Section “Wireless sirens” has been modified (p. 92).
2017-05
1.17
• List of functions available in the service mode menu has been supplemented
(p. 7-25).
• Information on the required version of DLOADX program has been modified
(p. 28).
• Information on the output cut-off time has been modified (p. 61).
• Information on the output state indication has been modified (p. 62).
• Description of the G
RADE 2 option has been modified (p. 74).
• Description of D
O NOT REPORT SATEL SERVER CONNECTION TROUBLE option
has been added (p. 76).
• Name of the D
O NOT REPORT TIME SERVER TROUBLE option has been changed
to D
O NOT REPORT TIME SERVER CONNECTION TROUBLE (p. 77).
• Name of the S
HOW ENTRY DELAY OF PARTITIONS parameter has been changed
to D
ISPLAY ENTRY DELAY OF PARTITIONS (p. 82).
• Name of the S
HOW EXIT DELAY OF PARTITIONS parameter has been changed to
D
ISPLAY EXIT DELAY OF PARTITIONS (p. 82).
• Description of S
IGNAL ENTRY DELAY OF PARTITIONS parameter has been added
(p. 82).
• Description of S
IGNAL EXIT DELAY OF PARTITIONS parameter has been added
(p. 82).
•
Information on AOCD-250 detector has been added (p. 88 and 90).