98 Programming SATEL
• Information on new functionality of key 0 when editing the multiple selection
list in text mode has been added (p. 25).
• Description of E
NTRY DELAY parameter has been modified (p. 49).
• Description of E
NTRY/EXIT INTERIOR zone type has been added (p. 54).
• Description of W
ITH VERIFICATION option has been modified (p. 55).
• Description of B
LOCKS VERIFICATION option has been modified (p. 57).
• Description of E-
MAIL MESSAGING option has been added (p. 68).
• Description of G
RADE 3 option has been modified (p. 71).
• Description of N
O SHORTCUTS IN MENU option has been added (p. 73).
• Description of E
XTENDED CHARSET option has been added (p. 85).
• Section describing test transmissions has been modified (p. 88).
• Section describing parameters and options of e-mail notification has been
added (p. 93).
2015-10 1.14
• Structure of the manual has been modified.
• Information on INT-TSH keypad has been added.
• List of functions available in the service mode menu has been supplemented
(p. 6-25).
• Information on the required version of DLOADX program has been added
(p. 27).
• Section has been added to describe parameters related to communication
between the control panel and the DLOADX program (p. 29).
• Section describing how to start remote programming via modem has been
modified (p. 35).
• Section describing how to start remote programming via Ethernet has been
modified (p. 38).
• Information on communication via the SATEL server has been added (p. 38
and p. 40).
• Section describing how to start remote programming via GPRS has been
modified (p. 40).
• Section on files with data saved by the DLOADX program has been added
(p. 43).
• Description of Z
ONE SENSITIVITY parameter has been modified (p. 51).
• Description of 95. E
NTRY INTERIOR zone type has been added (p. 54).
• Description of 96. F
IRE MONITORING zone type has been added (p. 54).
• Description of P
ULSATING option has been corrected (p. 64).
• Description of H
YSTERESIS parameter has been added (p. 66).
• Section describing system options has been modified (p. 68).
• Section describing parameters and options of keypads has been modified
(p. 76).
• Section describing timers has been modified (p. 82).
• Description of
HEX option has been added (p. 87).
• Description of SIA-IP
ACCT parameter has been added (p. 87).
• Description of S
ENDER ADDRESS parameter has been added (p. 94).
2016-04 1.15
• Information on the required version of DLOADX program has been modified
(p. 27).
• Description of D
O NOT REPORT SMTP SERVER TROUBLE option has been added
(s. 94).
2017-05 1.17
• List of functions available in the service mode menu has been supplemented
(p. 6-25).
• Information on the required version of DLOADX program has been modified
(p. 27).
• Information on the output cut-off time has been modified (p. 59).
• Information on the output state indication has been modified (p. 59).
•
RADE
3 option has been modified (p. 71).
To Next Page
Loading...
