M
Michelle GibsonAug 27, 2025
Why SATO CG2 prints poor label quality?
- CCrystal CarneyAug 27, 2025
If your SATO printer is producing poor label quality, it might be due to the media quality. Use higher quality media or SATO-certified media.
To Next PageTo Next PageWhy SATO CG2 prints poor label quality?
If your SATO printer is producing poor label quality, it might be due to the media quality. Use higher quality media or SATO-certified media.
Why SATO CG2 does not turn on?
If your SATO printer isn't turning on, it might be due to the power connector or AC adapter not being properly connected. Ensure that these are securely connected.
How to fix minor sensor error on SATO Printer?
To fix a minor sensor error on your SATO printer, perform a level adjustment if the sensor level is wrong, or adjust the sensor type if the sensor type is wrong.
What to do if SATO Printer shows minor error ribbon end?
If your SATO printer displays a 'minor error - ribbon end' message, it indicates that the printer is out of ribbon or the ribbon is ripped. Set the ribbon properly to resolve this.
General| Print Resolution | 203 dpi (8 dots/mm) |
|---|---|
| Print Method | Thermal transfer and direct thermal |
| Print Length | Up to 39.37 inches (1000 mm) |
| Memory | 8 MB Flash |
| Media Type | Labels, tags, tickets, and continuous media |
| Media Roll Diameter | 5" (127 mm) O.D. |
| Interfaces | USB, RS232 Serial |
| Optional Interfaces | Ethernet |
| Power Source | AC 100-240V |
| Supported Barcode Types | UPC-A/E |
| Ribbon Type | Wax, wax-resin, resin |
| Operating Temperature | 41 to 104°F (5 to 40°C) |
| Storage Temperature | 14°F to 140°F (-10°C to 60°C) |
Explains pictographic symbols used for safety instructions and warnings.
Guidelines for choosing a suitable environment for printer placement.
Requirements and precautions for connecting the printer to a power source.
Details the buttons and LED indicators on the printer's control panel.
Outlines the different operational modes available for the printer.
Generates test labels for diagnostic purposes and troubleshooting.
Allows selection and configuration of printer functions like downloads and interface settings.
Explains how printer indicators signal errors and their causes/corrections.
Provides a table of common printer problems and their solutions.
Offers guidance for troubleshooting issues with different printer interfaces (USB, RS232C, LAN).
Details how to use test prints to identify and resolve print problems.
Instructions for cleaning critical printer components for optimal performance.
Technical specifications and communication settings for the RS232C serial interface.
Technical specifications and pin assignments for the USB 2.0 interface.
Specifications for LAN and Wireless LAN connectivity, including settings.
