SATO S84 - Page 126

4 Operation and Configuration
124
S84-ex/S86-ex Operator Manual
FONT SELECT
Select a font from the stored fonts.
• GB18030: Simplified Chinese
• BIG 5: Traditional Chinese
• KSX1001: Korean
• YES: Printable
• NO: Non-printable
Move the cursor using the
/ buttons, change the value using the
/
buttons and then press the ENTER button to set the value.
The printable maximum size of the TrueType font varies depending on the
setting as follows:
Note
When the printer tries to print a TrueType font that is bigger than the
maximum size, a command error occurs.
SAVE USER DEF.
This is a screen for saving service mode and advanced mode settings
performed by the user as default settings.
• YES: Save the printer settings.
• NO: Do not save the printer settings.
Note
The printer can be initialized to this setting at a later time. Refer to Section
4.2.17 Default Setting Mode.
GB18030 BIG5 KSX1001 Available TrueType
font size (MB)
YES YES YES 4.6
YES YES NO 5.5
YES NO YES 5.6
YES NO NO 6.5
NO YES YES 10.6
NO YES NO 10.7
NO NO YES 10.8
NO NO NO 11.7