SATO S84 - Setting Mode Menu

4 Operation and Configuration
67
S84-ex/S86-ex Operator Manual
4.2.8 Setting Mode Menu
In the settings mode menu, the setting modes are shown as follows:
Select the setting mode according to the following procedure:
1 Press the LINE button to change the
printer to offline mode.
The printer changes to offline mode.
2 Press the ENTER button.
The printer changes to the setting mode menu.
3 Select the setting mode using the
/// buttons.
The selected setting mode shows on the screen and
the icon is highlighted by inverting its colors.
Menu Description
Online mode
Returns to online mode.
User mode
Access the settings related to the basic user configurations.
Interface mode
Access the settings related to the interfaces.
Memory mode
Access the settings related to the memory.
Service mode
Access the settings related to the media sensor adjustment and various
functions activation.
Advanced mode
Access the settings related to the advanced printer configurations.
Hex dump mode
Access and print the hex dump for troubleshooting.
RFID mode
Access the settings related to the optional RFID module.
Shows only when the optional RFID is installed.
Information mode
Access the information of this printer.