4 Operation and Configuration
144
S84-ex/S86-ex Operator Manual
4.2.14
Hex Dump Mode
The hex dump mode allows you to print the contents of the receive buffer in a hexadecimal format to
allow the data stream to be examined for errors and troubleshooting.
The flowchart shows the sequence of the setting screens for the hex dump mode. The table describes
each setting screen in detail.
Hex dump print
RECEIVE BUFFER or
INTERNAL DATA
+ button
Shows only when the
PASSWORD input is enabled
Hex dump print
RECEIVE DATA
+ button
For internal buffer Hex dump
printing and internal buffer data
printing, the screen automatically
changes to normal mode after
issuing the media.
* Press the , , or button to
select an item or set the value
accordingly. The active arrow icons
are shown on the screen.
button
After issuing the media
Data reception
icon is shown when RECEIVE
BUFFER is selected.
icon is shown when INTERNAL
DATA is selected.
button
or
button
or
button
button
or
button
button
button
button
SEND BACK DATA
+ button
button
To Next Page
Loading...
