4 Operation and Configuration
161
S84-ex/S86-ex Operator Manual
4.2.19
Upload Mode
The upload feature allows the operator to upload data (firmware, font/logo, TrueType font, configuration,
status5 log) from the printer and write it to an SD card or USB memory. When uploading is complete, the
LCD screen will return to the original screen after three seconds. If an error occurs, an error message will
show and the reason will be identified.
Press
button
+
Power On
・If the item selected on the UPLOAD SELECT screen does not have
data to be uploaded, nothing will be uploaded.
・Selecting ALL will upload all the items on the UPLOAD SELECT
screen.
・Screen messages are shown in English regardless of the setting
value on the SELECT LANGUAGE screen.
Upload
completed?
Yes
No
Reading the data
Writing the data
Finished receiving the uploaded data
Finished writing the uploaded data
3 short beeps sound when the
upload is completed
button
button
button
To Next Page
Loading...
