SATO S84 - Memory Mode

7 Appendix
224
S84-ex/S86-ex Operator Manual
7.1.4 Memory Mode
IGNORE CR/LF NO Yes Yes
IGNORE CAN/DLE NO (When STATUS4, MULTI is
selected in IEEE1284)
Yes Yes
SNTP FUNCTION DISABLE Yes No
NTP SERVER IP 000.000.000.000 Yes No
TIME ZONE 00:00 Yes No
ERROR NOTICE DISABLE Yes No
Setting Item Initial Value
Default
(User)
Default
(Shipping)
SLOT SETTING No Yes Yes
CARD SLOT SELECT SLOT0 RAM Yes Yes
CARD SLOT SELECT SLOT1 FROM Yes Yes
CARD SLOT SELECT SLOT2 SD Yes Yes
MEMORY MODE MEMORY SIZE - -
STORED CONTENTS FORM OVERLAY - -
MEMORY FORMAT NO - -
FORMAT START NO - -
Setting Item Initial Value
Default
(User)
Default
(Shipping)