SATO S84 - Page 225

7 Appendix
223
S84-ex/S86-ex Operator Manual
WLAN
ITEM NO. CHECK DISABLE (When STATUS5 is selected) Yes Yes
BCC CHECK DISABLE (When STATUS5 is selected) Yes Yes
STATUS REPLY TIMING ENQ (When STATUS4 is selected) Yes Yes
IEEE1284
PROTOCOL STATUS5 Yes Yes
ITEM NO. CHECK DISABLE (When STATUS5 is selected) Yes Yes
BCC CHECK DISABLE (When STATUS5 is selected) Yes Yes
Receive Buffer 1 ITEM (When STATUS4 is selected) Yes Yes
IEEE1284 ACK SIGNAL 00.5us (When 1ITEM is selected) Yes Yes
RS-232C
BAUDRATE 19200 Yes Yes
PARITY BIT NONE Yes Yes
STOP BIT 1 BIT Yes Yes
CHARACTER BIT 8 BIT Yes Yes
PROTOCOL STATUS5 Yes Yes
ITEM NO. CHECK DISABLE (When STATUS5 is selected) Yes Yes
BCC CHECK DISABLE (When STATUS5 is selected) Yes Yes
RECEIVE BUFFER 1 ITEM (When READY/BUSY, XON/
XOFF is selected)
Yes Yes
USB
Protocol STATUS5 Yes Yes
ITEM NO. CHECK DISABLE (When STATUS5 is selected) Yes Yes
BCC CHECK DISABLE (When STATUS5 is selected) Yes Yes
Bluetooth
Authentication Level NONE Yes Yes
PIN CODE 0000000000000000 Yes Yes
DEVICE NAME SATO_PRINTER Yes Yes
DISCOVERY SETTING ENABLE Yes Yes
PARAMETER SETTING(ISI) 0800 Yes Yes
PARAMETER SETTING(ISW) 0012 Yes Yes
PARAMETER SETTING(PSI) 0800 Yes Yes
PARAMETER SETTING(PSW) 0012 Yes Yes
PROTOCOL STATUS4 Yes Yes
CRC CHECK DISABLE Yes Yes
Setting Item Initial Value
Default
(User)
Default
(Shipping)