SATO S84 - Notification Function

7 Appendix
244
S84-ex/S86-ex Operator Manual
7.6 Notification Function
This section shows the media motion when the set notification interval has been reached.
You can set the notification function in the
NOTIFICATION FUNCTION SETTING screen of the user mode
menu.
Print head position
Standby
PRINTING…
Standby
After three seconds
Warning
message
(1)
(2)
(3)
(1) (2)
(3)
(1)
(2) (3)
Notification distance
has been reached.
(3)
• The counter is cleared by pressing the ENTER button while
the warning message is shown. (Start counting from 0 again.)
• When resuming printing without pressing the
ENTER button,
the printer enters the offline mode and the counter is not cleared.
(The warning is shown again while in standby mode.)
• When the LINE button is pressed, the printer enters online or
offline mode from the warning screen. The same goes for other
buttons, entering each screen.