SATO S84 - Interface Mode

7 Appendix
222
S84-ex/S86-ex Operator Manual
7.1.3 Interface Mode
NOTICE FUNCTION DISABLE Yes Yes
CLEAN PRINTER NOTICE DISTANCE 0 m Yes Yes
CHANGE ROLLER NOTICE DISTANCE 0 km Yes Yes
CHANGE HEAD NOTICE DISTANCE 0 km Yes Yes
Setting Item Initial Value
Default
(User)
Default
(Shipping)
INTERFACE AUTO SELECT DISABLE Yes Yes
INTERFACE SETTING NO - -
PORT SELECT DATA PORT Yes Yes
DATA PORT USB Yes Yes
SUB PORT NONE Yes Yes
LAN
DHCP SETTING DISABLE Yes No
IP ADDRESS 192.168.001.001 Yes No
SUBNET MASK 255.255.255.000 Yes No
GATEWAY ADDRESS 0.0.0.0 Yes No
PORT NUMBER1 1024 Yes No
PORT NUMBER2 1025 Yes No
PORT NUMBER3 9100 Yes No
PROTOCOL STATUS5 Yes Yes
ITEM NO. CHECK DISABLE (When STATUS5 is selected) Yes Yes
BCC CHECK DISABLE (When STATUS5 is selected) Yes Yes
STATUS REPLY TIMING ENQ (When STATUS4 is selected) Yes Yes
WLAN
DHCP SETTING Disable Yes No
IP ADDRESS 192.168.001.001 Yes No
SUBNET MASK 255.255.255.000 Yes No
GATEWAY ADDRESS 192.168.001.002 Yes No
COMMUNICATION MODE AD HOC Yes No
SSID SATO_PRINTER Yes No
CHANNEL 06 Yes No
PROTOCOL STATUS5 Yes Yes
Setting Item Initial Value
Default
(User)
Default
(Shipping)