SATO S84 - Adjusting the Media Stop Position

5 Cleaning and Performing Printer Adjustments
180
S84-ex/S86-ex Operator Manual
5.3.3 Adjusting the Media Stop Position
The stop position for options (such as Dispenser) is adjustable within the range of +3.75 mm to -3.75 mm
(+0.15” to -0.15”) in the adjustment mode described above.
Note
The above dispensing position for printing indicates the label stop position when the media sensor is set to
Gap sensor.
Adjust the stop position using the following procedure:
1 When the printer is in online mode, press
the LINE button to change the printer to
offline mode.
Adjustment Location Adjustment Range
Adjustment Mode: Offset Position +3.75 mm to -3.75 mm
(+0.15” to -0.15”)
-3.75 mm (-0.15”) ~ +3.75 mm (+0.15”)
Media feed direction
Print position
(Print head)
Adjustment for
“+” value
No
adjustment
Adjustment for
“-” value
Dispensing
position