5 Cleaning and Performing Printer Adjustments
179
S84-ex/S86-ex Operator Manual
2 Press the button to enter the adjustment
mode.
PITCH POSITION shows on the screen.
3 Change the setting value. Press the /
buttons to set the desired value.
Set the offset value with ‘+’ to move the print
position opposite the feed direction, and the value
with ‘-’ to move the print position in the feed
direction.
The setting value is adjustable by 0.25 mm (0.01”)
regardless of print resolution.
The setting range is from -3.75 mm (-0.15”) to
+3.75 mm (+0.15”).
4 Press the ENTER button to save the
setting and go to the next adjustment
screen.
To Next Page
Loading...
