SATO S84 - Adjusting the Base Reference Point; About the Base Reference Point

5 Cleaning and Performing Printer Adjustments
177
S84-ex/S86-ex Operator Manual
5.3 Adjusting the Base Reference Point
5.3.1 About the Base Reference Point
The base reference point is the point at which one determines the print position and the stop/dispensing
position.
The base reference point differs depending on the operation mode or the media sensor you use.
Gap Label
I-mark Label
Continuous Mode
Gap Label
I-mark Label
Print and
dispensing
position
Dispenser Mode
Print and
dispensing
position
Print and
stop position
Print and
stop
position
Feed direction Feed direction
Feed direction Feed direction