SATO S84 - Page 147

4 Operation and Configuration
145
S84-ex/S86-ex Operator Manual
SELECT DUMP DATA
Select the data for printing the hex dump.
• RECEIVE DATA: Print the hex dump of the received data.
• RECEIVE BUFFER: Print the hex dump of the received print data (one
item).
• INTERNAL DATA: Print the setting values of the internal buffer.
• SEND BACK DATA: Return the received data (one item).
Note:
RECEIVE BUFFER and SEND BACK DATA cannot be selected when
there is no received data.
HEX DUMP
Set the print width of the hex dump.
• NORMAL: Print the received data with sixteen bytes in one line.
• HALF: Print the received data with eight bytes in one line.
ONLINE
This screen shows an online status icon when RECEIVE DATA or
RECEIVE BUFFER is selected.
ONLINE
This screen shows an online status icon when INTERNAL DATA is
selected.