SATO S84 - Page 144

4 Operation and Configuration
142
S84-ex/S86-ex Operator Manual
ROTATE LABEL
Set the rotation for printing.
• 0: Print the media as usual without rotation.
• 180: Print the media with 180 degree rotation.
Note
The LABEL SIZE ADJ screen shows when you press the ENTER
button with 180 selected.
LABEL SIZE ADJ WIDTH
Specify the width of the label for rotation.
The setting range varies depending on the model as follows:
Note
Shows only if ROTATE LABEL is set to 180.
LABEL SIZE ADJ HEIGHT
Specify the height of the label for rotation.
The setting range varies depending on the model as follows:
Note:
Shows only if ROTATE LABEL is set to 180.
Model Setting Range Default Value
S84-ex (203 dpi) 0000-0832 0832
S84-ex (305 dpi) 0000-1248 1248
S84-ex (609 dpi) 0000-2496 2496
S86-ex (203 dpi) 0000-1340 1340
S86-ex (305 dpi) 0000-2010 2010
Model Setting Range Default Value
S84-ex (203 dpi) 00000-20000 20000
S84-ex (305 dpi) 00000-18000 18000
S84-ex (609 dpi) 00000-09600 09600
S86-ex (203 dpi) 00000-09992 09992
S86-ex (305 dpi) 00000-14988 14988