SATO S84 - Data Transfer Modes

4 Operation and Configuration
154
S84-ex/S86-ex Operator Manual
DEFAULT PRINTER SETTING
Select whether or not to initialize the printer setting.
• YES: Initialize the printer setting.
• NO: Cancel and return to the DEFAULT MODE screen.
Note:
Shows only if DEFAULT MODE is set to PRINTER SETTING.
DEFAULT PRINTER SETTING SHIPPING USER
Select the initialization type.
• SHIPPING: Initialize the printer to the shipping state.
• USER: Initialize the printer to the state with the SAVE USER DEF
setting.
Note:
• Shows only if DEFAULT PRINTER SETTING is set to YES.
• If you have selected USER when the SAVE USER DEF is not
registered, the printer will be initialized to the shipping state.
DEFAULT ALT. PROTOCOL
Select whether or not to initialize the protocol code.
• YES: Initialize the protocol code.
• NO: Cancel and return to the DEFAULT MODE screen.
Note:
Shows only if DEFAULT MODE is set to ALT. PROTOCOL.
DEFAULT WLAN SETTING
Select whether or not to initialize the WLAN setting.
• YES: Initialize the WLAN setting.
• NO: Cancel and return to the DEFAULT MODE screen.
Note:
Shows only if DEFAULT MODE is set to WLAN SETTING.