5 Cleaning and Performing Printer Adjustments
187
S84-ex/S86-ex Operator Manual
6 Press the / buttons to select the type
of sensor to be adjusted and then press the
ENTER button.
The instruction of placing the media shows.
7 Open the top cover and unlock the media
feed and media sensor assembly .
8 Place the media/liner on the media
sensor.
To adjust the I-mark sensor, place the white area of
media under the media sensor.
To adjust the gap sensor, peel off the label and
place the liner under the media sensor.
9 Press the media feed and media sensor
assembly down to lock it.
To get the correct adjustment result, perform the
adjustment after you have closed the media sensor
assembly.
10
Press the ENTER button to start the
sensor adjustment.
To Next Page
Loading...
