SATO S84 - Page 198

5 Cleaning and Performing Printer Adjustments
196
S84-ex/S86-ex Operator Manual
4 Use the slotted screw driver to turn the adjustment dials . Set the pressure balance
according to the media width and the media thickness.
Notes
• The factory default setting is .
• The thickness of the media includes the liner.
Media Thickness
0.05 to 0.20 mm
(0.002” to 0.0079”)
Thin paper/normal label, etc.
0.20 to 0.31 mm
(0.0079” to 0.30122”)
Thick paper/tag, etc.
Media Width
S84-ex
30 to 128 mm
(1.18” to 5.04”)
10 to <30 mm
(0.39” to <1.18”)
30 to 128 mm
(1.18” to 5.04”)
10 to <30 mm
(0.39” to <1.18”)
S86-ex
80 to 177 mm
(3.15” to 6.97”)
51 to <80 mm
(2.01” to <3.15”)
80 to 177 mm
(3.15” to 6.97”)
51 to <80 mm
(2.01” to <3.15”)
Pressure Balance
Gradation
