6 Troubleshooting
206
S84-ex/S86-ex Operator Manual
22
Calendar error
Lights red.
One long beep.
To clear the error:
Power off the printer.
The date and time of the
calendar IC are incorrect
or the calendar IC is not
installed.
Check if you have
installed the calendar IC
or replace the calendar
PCB.
26
Overheat error
Flashes blue and red
alternately.
One long beep.
To clear the error:
Stop the operation of
the printer and wait
until the temperature
decreases.
The temperature of the
printer has exceeded its
tolerance value.
Stop the operation of the
printer to let the
temperature decrease.
27
Command error
Flashes red.
Three short beeps.
To clear the error:
Press the LINE
button.
Incorrect command or
parameter in the print
data.
Caaa: position of error
occurrence
<bb>: error command
name
cc: error code
Check the print data.
Refer to Section 6.1.1
More Information about
Command Error for
details.
35
CRC check error
Flashes red.
Three short beeps.
To clear the error:
Press the LINE
button or cancel the
print job.
The CRC code of the data
to be sent (one item) is
incorrect.
Check the data to be sent
and the communication
settings.
LINE button: Continue
printing from the print data
where the CRC error
occurred.
Send the SUB command:
Clear the CRC error and
continue printing from
where it stopped.
Error
No.
Message LED/Buzzer Cause Countermeasure
To Next Page
Loading...
