SATO S84 - Page 213

6 Troubleshooting
211
S84-ex/S86-ex Operator Manual
06
Clean print head
and platen roller
Lights blue.
One short beep.
To clear the error:
Press the
ENTER button.
The set notification
interval has been
reached.
Clean the print head and
platen roller.
Refer to Section 5.2
Maintenance of the Print
Head and Platen Roller
for details.
07
Change print head
Lights blue.
One short beep.
To clear the error:
Press the
ENTER button.
The set notification
interval has been
reached.
Replace the print head.
Refer to Section 7.7.1
Replacing the Print
Head for details.
08
Change platen
roller
Lights blue.
One short beep.
To clear the error:
Press the
ENTER button.
The set notification
interval has been
reached.
Replace the platen roller.
Refer to Section 7.7.2
Replacing the Platen
Roller for details.
Warning
No. Message LED/Buzzer Cause Countermeasure