SATO S84 - Page 75

4 Operation and Configuration
73
S84-ex/S86-ex Operator Manual
CLEAN PRINTER
Set the notification distance for cleaning the printer.
The setting range is from 000 to 999 m.
Note
The notification function will be disabled if the distance is set to 0.
CHANGE ROLLER
Set the notification distance for changing the platen roller.
The setting range is from 000 to 150 km.
Note
The notification function will be disabled if the distance is set to 0.
CHANGE HEAD
Set the notification distance for changing the print head.
The setting range is from 000 to 150 km.
Note
The notification function will be disabled if the distance is set to 0.
SETTING FINISH?
Confirm to complete the setting.
• YES: Returns to the user mode screen.
• NO: Returns to the NOTICE FUNCTION screen to select an item.
P
NP
NP