SATO S84 - Page 97

4 Operation and Configuration
95
S84-ex/S86-ex Operator Manual
PARAMETER SETTING(ISI)
Set the Bluetooth communication parameter (ISI).
The setting range is from 0012 to 1000.
Note
• Shows only if the Bluetooth interface is selected and DETECTING
SETTING is enabled.
• You cannot set the ISI value if it is smaller than the ISW value.
• The setting will be effective only when you power on the printer again.
PARAMETER SETTING(ISW)
Set the Bluetooth communication parameter (ISW).
The setting range is from 0011 to 1000.
Note
• Shows only if the Bluetooth interface is selected and DETECTING
SETTING is enabled.
• You cannot set the ISW value if it is greater than the ISI value.
• The setting will be effective only when you power on the printer again.
PARAMETER SETTING(PSI)
Set the Bluetooth communication parameter (PSI).
The setting range is from 0012 to 1000.
Note
• Shows only if the Bluetooth interface is selected.
• You cannot set the PSI value if it is smaller than the PSW value.
• The setting will be effective only when you power on the printer again.
PARAMETER SETTING(PSW)
Set the Bluetooth communication parameter (PSW).
The setting range is from 0011 to 1000.
Note
• Shows only if the Bluetooth interface is selected.
• You cannot set the PSW value if it is greater than the PSI value.
• The setting will be effective only when you power on the printer again.