VC 1100 Technical Data
VC1100E/tedata Version 2 →
© Schenck VIBRO GmbH, D-64273 Darmstadt, November 97 C01 / C02 - C11 / C12 2-1
2 Technical Data
Supply Voltage
• Type VC-1100-C01
Type VC-1100-C11 115 V AC or
230 V AC +15 % / -25 %
jumper selectable
48 ... 400 Hz
Power consumption approx. 15 VA
• Type VC-1100-C02
Type VC-1100-C12 24 V DC (16 ... 36 V)
Power consumption approx. 15 W
Fuses
• Supply Voltage 115/230 V AC 2 Thermo-Resistors
250 °F (125 °C)
built-in the primary
transformer windings
• Supply Voltage 24 V DC NTC - Resistor
Transducer supply -24 V 2 x 30 mA short-circuit-
proof
• EMC Emitted interference according to EN 50081-1
Immunitity from interferences according to EN 50082-2
To Next Page
Loading...